In the era of truly wireless earbuds, neckbands have lost their charm for the majority of users. But this isn’t to say that neckbands are inferior. In fact, most neckbands pack a punch in terms of battery life that lasts over 30 to 50 hours. There are many neckbands available from various brands, just like TWS, but the OnePlus Bullets Wireless Z2 neckband has been the talk of the town for quite a long time. Featuring massive 12.4mm drivers for a solid sound experience, an IP55 rating, and fast charging that can top up the device to run 20 hours after only 10 minutes of charge, it is a great neckband for daily use. But what if the device doesn’t turn on? If you are facing an issue where the Bullets Wireless Z2 is not turning on but is charging, consider reading this guide for workarounds to fix the issue for good.
Well, the reputation of OnePlus has taken a huge hit after users who bought a OnePlus phone started facing the infamous green line issue. Initially, OnePlus handled the situation well by offering free screen replacement, but fast forward to Q3 of 2024, and that isn’t the case anymore. Anyway, coming to the neckband, you are not the only one facing the same issue, as there are multiple reports of users who have shared their experiences facing this problem. So, now you must be wondering whether there are workarounds to fix it, right? There are. Check out the next section below.
OnePlus Bullets Wireless Z2 not turning on but charging: How to fix it
When it comes to troubleshooting and fixing an issue in a TWS or a neckband, things are far more complex. For the majority of the cases, the issue is related to hardware rather than software. That said, try these workarounds first, and see whether they are of any help:
1) Reset OnePlus Bullets Wireless Z2
One of the most common workarounds for fixing issues related to the device not turning on is to perform a simple reset. To try this out, begin by pressing the Volume Up and Volume Down buttons on the device for at least 5 seconds until you hear a beep sound. Once you hear it, this means that the device is reset. Now, check whether it turns on.
2) Charge for a while
An unconventional workaround for this issue is to charge the device while both the earbuds are magnetically connected. Now, while in charge, detach them, and keep charging for another 1-2 minutes. After this, press and hold the quick switch button on the neckband for around 10 seconds. Now, attach the earbuds again, and then detach them. After this, check if they are working.
3) Press the Bluetooth button while charging
If the device doesn’t turn on after it is removed from charging, plug it in to charge, and then press the Bluetooth button on the neckband. Now, check if the device is working.
4) Detach Earbuds before trying to pair
Make sure that both earbuds are not connected magnetically while you are trying to pair them with your smartphone. Detach both of them and then check whether they show up on the list of the Bluetooth devices.
5) Contact Support for Replacement
As stated earlier, issues with neckbands and TWS are pretty much hardware-related, which is why requesting a replacement is the only effective solution. If your device is under warranty and has not been prone to physical damage, you can contact OnePlus support or visit their official service center, and they should be able to replace your current device with a new one, hopefully fixing the issue.
With that said, these are the workarounds for now that you can try to fix the OnePlus Bullets Wireless Z2 not working issue. If you find this guide informative, consider visiting Android Gram for more such interesting content on all things gaming.
