Lenovo Legion Go is a Steam Deck competitor that comes from the reputed gaming brand Lenovo. Seeing the success of the Steam Deck, the handheld gaming market has gone up for a toss, with competitors from AyaNeo and other brands pouring in. Each of these systems has its own special features that set them apart from the rest. The main allure of the Lenovo Legion Go is that it is a based on an established gaming platform and is capable of running the latest games with cutting-edge graphics at higher framerates. There are, however, some hardware issues that accompany this handheld like the issue where it won’t turn on. So, if you too are struggling with the same, continue reading to know how you can deal with it.
Despite the Steam Deck being one of the most established gaming handhelds out there right now, the PC handheld market is still fiercely competitive. If you want to play games using a handheld device, there are many options for you to choose from. The more you look up options, the more confusing it gets. It is often better to stick to a device with an established service network like Lenovo when it comes to gadgets such as these. However, issues can arise on any device and the Lenovo Legion Go is no exception.
Lenovo Legion Go not turning on: How to fix it?
The Legion Go is a handheld device that is very capable. Since it comes with a Windows 11-based operating system out of the box, it makes it a lot easier to run games. While this is typical of a hardware-oriented handheld, it does come with the same issues that Windows systems come with. As per recent reports, players have encountered an issue where the device sometimes turns off and does not turn back on. So, we have shared some workarounds for you to try.
How to solve this?
If this was a physical keyboard and screen-based device, you could always open it up and take a look inside. Since this is not a physical keyboard and display device, opening it up is out of the question. However, there are a few steps you can take:
1). Hard Reset
A hard reset can be done by holding the power button down of the Legion Go for 30 seconds and then waiting about 10 seconds before starting it again. This has been known to solve issues like this before and can certainly be applied here as well.
2). Hold the Volume Down and Power Button
This was suggested to a Reddit user by Lenovo Customer Support. For this method, you need to press and hold the volume down and the power button at the same time for about 10 seconds. This usually resets the device and you will have no issues turning it on after this.
3). Hold down the legion and power buttons
This is also another method to hard reset the device and restart the system. This allows you to reset the system and force it to turn back on. So, hold down both the Legion buttons and the Power button and then check if the device turns on.
4). Boot into safe mode
The other option to reset your device is to boot into safe mode. Since this only starts with essential apps, you can use it to see if there is a software issue with the default apps in your system. To do this, hold down the power button of the Legion Go until you see the ‘boot into safe mode’ option. Now, you can go ahead and look through it to see if there are any issues. If not, there is a non-essential app that is causing the issue.
5) Charge the device
If the issue persists, make sure to charge the Legion Go. Connect it to a power outlet and leave it charging for about 15 minutes. After this, try turning it on.
6). Reach out to support
If none of these methods work, your best bet is to reach out to the support team. Since this is a handheld, it tends to be more sensitive than a typical laptop or PC. The official support team will be able to suggest the best methods to solve this issue on your end.
Well, this was all about how to solve the Legion Go not turning on issue. If you found this guide helpful and would like to read more, make sure to visit Android Gram for more such content.