Unable to enjoy your favorite content? Are you confused because your Sceptre TV displays a no signal error? Here are all the troubleshooting methods you can use to get your Sceptre TV working again.
Many Sceptre TV users have reported a no signal error whenever they try to watch something on their device. They complained that their screen turned blue with the error message ‘No Signal’. Fortunately, it is easy to solve this error and has a very low probability of reoccurring. Just follow the step-by-step guide given below and resolve the problem almost instantly.
Fixes for Sceptre TV no signal issue:
1) Check the Video cable:
Your video cable may not be correctly attached to your device. Make sure that it is plugged in tightly. If the cable is connected correctly, test the video cable on a different device. This may give you more insight into whether the cable is at fault. If the cable is faulty, switch it for a new one. This should solve the Sceptre TV no signal issue. Also, test the source for the video with a different TV. Suppose you are using a streaming device like a Fire TV stick, connect it to another device. This will let you know if the source has failed to work.
2) Check the HDMI port:
If changing the video cable doesn’t fix the problem, check the HDMI port it is connected to. Every HDMI port slot has a number assigned to it. Check which HDMI port you have connected your device with. Use the remote to switch the source to that port. Just press the Source button on your remote and change to the port connected to the cable. If the source is connected to the right port, try changing the connection to a different port. Plug the video cable into a different HDMI port and switch the source. A lot of times the HDMI port on a device can fail. And it is difficult to tell if it’s broken or not. So it’s better just to change the connection. This should fix the Sceptre TV no signal issue for you.
Also read: Sharp Roku TV Black Screen issue: How to fix it?
Apple TV app not working on Sony TV: How to fix it?
3) Reset your Device:
If you have gone through the steps above and were still unable to fix your problem, your TV might be at fault. When troubleshooting the connections and source inlet is not enough to tackle the no signal error, it’s time to troubleshoot your TV. A reset is the simplest way to troubleshoot a problem on your TV. Just unplug the power cable from the wall socket and let it be for ten minutes. After ten minutes, plug the power cable back in and turn on your TV. Check if the Sceptre TV no signal issue still persists.
4) Factory reset:
Before going forward with this step, you must acknowledge the outcome of a factory reset. If none of the above methods worked, you might consider a factory reset. But, you will lose all your account data, applications, and other settings saved on the device. Go to Settings > Device preferences > Reset > Factory data reset > Erase everything. Let the reset commence and wait for some time. Once the reset is done, you shouldn’t face the Sceptre TV no signal error anymore.
If none of the above solutions work, we recommend you to contact Sceptre Support for further assistance in the matter.